You are here

Fundamentals of Building a Test System Webinar Series

 

 

 

Fundamentals of Building a Test System Webinar Series

It is critical you test and validate product functionality to ensure the success of your organization. Hear test engineers from NI, Wired in Software and EnvisEng share their best practices for building a test system.

In this interactive webinar series, learn about key components to building test systems from start to finish.

Engineers from a variety of industries share personal experiences and lessons learned to help you build a test strategy that addresses your needs today and in the future. Explore best practices on topics ranging from software abstraction to software deployment as well as rack layout and signal switching strategy. Experts will be on hand to answer your questions in real time.

Dates Covered

28 March 2017 &
29 March 2017 

Times

10am SGT/ 1pm AEDT
11am SGT/2pm AEDT

 

Cost

Free

 

 

On the go during this time? You can get the Adobe Connect Mobile app and watch from your smartphone or tablet. Click here

 


Register Here

Switching, Mass Interconnect, and Fixturing Considerations

28 March, 10am SGT/ 1pm AEDT
by Gobinath Tamil Vanan, NI

Automated test applications often require implementing a network of switches that facilitate signal routing between the variety of instrumentation in your system and the devices under test. Learn about different switching architectures and how to determine the best switching strategy to meet the needs of your test system.


Thermal and Power Planning of Automated Test Systems

29 March, 10am SGT/ 1pm AEDT
by Gobinath Tamil Vanan, NI

Obtain best practices for planning cooling and power systems in automated test systems, from optimizing heat dissipation within the test rack to planning for reliable and consistent operation with power systems.


Register Here

Using compactDAQ and LabVIEW for a Parallel EOL Test and Calibration Station

28 March, 11am SGT/ 2pm AEDT
by Christopher Farmer, Wired In Software

Learn how an 8-slot cDAQ system was selected as the backbone for a 4-way End Of Line Calibration and Final Test Station.  The power and flexibility of LabVIEW allowed for an easy transition from single unit test to multiple unit test, a simple but flexible test engine to control the testing order, as well as maintaining a pressure control system, and communicating to each uut concurrently via a serial-based protocol. Presented by Christopher Farmer, Certified LabVIEW Architect.

 


Register Here

Abstraction Layers: A critical consideration in ATE Software Design

29 March, 11am SGT/ 2pm AEDT
by Karina Taylor, EnvisEng

Building an Automated Test System starts with design, not development, and the key to a good ATE design is one that allows for changes in test requirements throughout the project, the ability for multiple engineers to develop the ATE software simultaneously, and ease of maintenance and upgrades over the long-term.

This webinar introduces common ATE development issues, and then covers design tips based on “software abstraction layers” that help to alleviate such issues.